Liquid RTV-2 silicone rubber application:
Liquid RTV-2 silicone rubber are suitable for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV-2 silicone rubber allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists create the perfect replica.
Features of IS-CR30 RTV-2 silicone rubber:
1. Excellent Workability
Part A silicone rubber and Part B hardener are mixed and then poured into the mold to create a silicone rubber mold quickly. Working time and curing time can be adjusted.
2. No need Mold-releasability
The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are mostly unnecessary.
C.Good Dimensional stability
The cured silicone rubber molds offer good dimensional stability, with little shrinkage.
D. Good Flowability
They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.
E.Heat and chemical resistance
RTV-2 silicone rubber cured molds have outstanding resistance to heat and chemicals.
F.Deep-section curability
RTV-2 silicone rubebr cure uniformly throughout the mold, regardless of thickness
G.Non-exothermic
No heat is generated during curing, meaning no adverse effects to the original.
Contact us to get the latest datasheet and parameter:
Mr. Johns
Inno Silica Co.,Ltd
Mob: +86-157 6863 9143
